Then using the fab circles from the movers and shapers range I firsty stamped a pocket watch using the pocket watch and base plate. Then I used the cut out shape and re cut using the smallest circle die to remove a piece from the centre, this gave me the piece placed on the box below.
So below shows the nearly finished piece that has used two masks made from the die and pocket watch base and frames, leaving a fab place in the centre just waiting to be filled...
The key is also a movers and shapers die and here has been used with the wonderful steampunk gent from time travellers set:
I then used the cogs for somewhere else in the piece.
I know this is a large piece with lots of die cuts..but I wanted to show you how the same idea can be achieved on small pieces..like these ATC's below where is used the in and outside pieces. Also the cool thing about the ATC is the inside space is magnetic so lots of the Movers and Shapers just fit inside...
This ATC below uses the heart shape and then the other uses the atc shape with the heart missing..
Finally a previous piece to show other Movers and Shapers dies in action:
This piece above uses the large pocket watch die for the base and then the large pocket watch die in conjunction with the movers and shapers die for the centre piece to be removed to create the frame.
All the dies and Movers and Shapers I have used are listed below with links to the lovely Linda's Funkie Junkie Boutique, where these are already at a fab price and will now have another 15% off for this week as they are the Friday Focus..
Have a fun and inky one!